CO ALARM WHT FLUSH W/TRIM FOR MARINE 12V HARDWIRE

Description

Marine Mini Carbon Monoxide Alarm with Trim Ring

This unit comes with a trim ring to cover existing screw holes and fit newer units into previous installation cutouts.
NMMA Listed Component.
Works in harsh marine environments and extreme temperatures. This is the only marine CO alarm listed to operational temperatures of -40°F to 158°F. Alarm has consistently held up in the excessive cold and heat due to high quality sensor.
No False Alarms due to new boat smell, outgassing or non-hazardous levels of hydrocarbon gases encountered while boating. Interconnect and generator shut off alarms available.
Alarm Mute with Auto Reset. With a press of a button, the mute circuit will temporarily silence the alarm while the boater ventilates the cabin. Alarm will reactivate if it still senses dangerous levels of CO.
End of Life Signal alerts boater to replace the alarm after 5 years of service.
Memory Scan. Retains the CO level that activated the alarm. After ventilation, it is impossible to know what the CO level was unless the detector has memory.
Rapid recovery sensor resets when silenced or reactivates alarm if dangerous levels of CO remain.
Operating Specifications: Conforms To ANSI / UL STD 2034, Testing Laboratory: ETL/Intertek, Alarm Point: 400 PPM 4-15 Minutes, Low voltage power warning at 7 Volts, Power Supply and Current Draw: 37 mA at 13.8 VDC, Operational Range: 13.8 Volts +/-15%, Low voltage power warning at 7 Volts